How to Remove an Interior Wall in 5 Steps

Creating space in your home or moving things does sound good to remodel your home. But if it includes releasing interior walls, things start to get a little difficult. Dealing with this problem is not something you should take lightly. This will require expertise and res. Fortunately, you don't need permission to do it, but you might ask for some professional help to handle everything correctly.

Planning everything going forward is very important. You should know that this type of construction work may take a full week for you to do. You will most likely have to spend between $ 300 to $ 1,000 for a regular wall or up to $ 3,000 if it's a weight-bearing wall.

Safety is a big problem too abandoned building materials can be dangerous and dangerous, so you need to think about that too.

We have prepared for you a number of helpful suggestions that you can complete in 5 easy steps.

How to Remove an Interior Wall in 5 Steps

Gather Tools and Materials

Every good job requires good tools and materials. Before you start any work, make sure you have put together everything on the list that you need.

Make a list before you begin. Determine the amount of everything you need and buy. Find all the right tools needed for the job and once you are sure that you have everything, you will start.

Get ready to knock down the wall

Before you really start tying walls you need to make certain preparations. This includes covering all vents and windows so that no loose debris ends up in another room. You can also cover the entire door with plastic so that the dost particles don't end up in other parts of the house. Remove all the doors, baseboard and trim from the wall before you start tearing it down.

It's also good to have a helping hand because this is hard work and needs help. Recruit your friends to help you and also rent a garbage truck or service that you can use to get rid of all the debris that you will most likely get.

Start Demolition

This is where the fun part begins and all the hard work begins. First, make sure to remove all electrical outlets or things that might get in. Also, it is necessary to determine whether it is a wall that holds a load too. Outline the part that you want to get rid of with a penis or cut it with a knife. Start with a small starter hole that you can make with a sledgehammer.

Remove all drywall panels from between the studs. You might find some isolation that you need to get rid of. Remove the drywall from the other side after you remove the one from the first side.

Cut Studs and Plates

Now comes the part where you need to cut and remove all studs. You need a chainsaw for that reply and help. When you cut ask a friend to hold the stud for you while you cut at the bottom. Pull everything when done.

After that comes the part where you need to remove the top and bottom plates. You need a bar for that. Have your friend hold the plate when you take it off and do the same for both. Safety first, don't forget that.

Patch Everything

After removing the wall, you must clean it. You need to make sure you patch up the ceiling and arrange everything. It is important to patch all the hoses and collect all the debris made. It is also important to repair the floor, you do not want any residual interference.